Demolition

Architectural Site Plan

• Scalable architectural site plan showing location of proposed building or structure on property, all platted property lines, and other buildings or structures on the property. Site plan must also show grades of walkways adjacent to building and at building exits, accessible parking spaces, drop zones, access aisles, accessible routes, curb ramps including counter slopes, stairs, landings, handrails, handicapped parking and signage, etc. in such detail as to be able to determine compliance with ICC/ANSI-2003 requirements. Required site plan submittal is in addition to any submittal made to other city divisions. 
• The plan must include exterior elevations depicting all exposed mechanical and electrical equipment, meters, gas lines, access ladders etc. The plan must depict the methods of screening these elements as determined by the Planning Division.
• Digitally submitted plans are to be signed and sealed by the design professionals.

Soil Report

• Provide a soil report including foundation recommendations that are site specific. Soils report must bear an original wet stamp and signature of a Colorado registered professional engineer. 

Structural Calculations

• Provide structural calculations bearing an original wet stamp and signature of a Colorado registered professional engineer. 

 Energy Compliance Calculations

• Provide energy compliance calculations based on the 2015 International Energy Conservation Code or other approved nationally recognized standard bearing an original wet stamp and signature of a Colorado registered professional engineer or Colorado registered architect (Include mechanical compliance and interior and exterior lighting if applicable. Building envelope compliance only required for new buildings). 

Commercial Plumbing Data Sheet

• Provide a completed Commercial Plumbing Data Sheet. 

Special Inspection Agreement

• Provide a completed Special Inspection Agreement when using 3rd party inspection agency. Include resumes and make sure all parties have signed document. 

Project Specifications

• Provide project specifications, if applicable, bearing an original wet stamp and signature of a Colorado registered architect or professional engineer.

Information on special systems, rated assemblies, or other special features.

Engineered Plans for Commercial Kitchens

• Including equipment layout, plumbing, grease interceptor details and sizing calculations, ventilation/makeup air balance schedule and interlocking details, minimum outside air calculations per Chapter 4 of the International Mechanical Code, calculations for kitchen hood exhaust air volumes and velocities, and kitchen hood protection details.

Design Criteria for Structures

Grease Interceptors 

1. Complete street address of building, including unit or suite numbers if applicable. Addresses for new buildings must be based on an official, city approved address plat. Submittals for new buildings for which an address plat has not been submitted and approved will not be accepted.
2. Name, complete address (including city, state and zip code) and phone number (include fax number if possible) of building or property owner. Please note that this is not the owner of the business or tenant, but the actual owner of the building or property.
3. Name, mailing address, phone and email address of contractor, if contractor is known.
4. Name, phone and email address of the person to contact for questions or additional information regarding the proposed work. Please note that the person designated in the “Person to Contact” entry field on the permit application will be sent the plan review comments generated from the plan review process.
5. Complete information regarding the project architect and engineer including name, complete address (including city, state and zip code) and phone number, where applicable.
6. Description of all proposed work (Briefly put New Core and Shell or TF for company name), then in “Detailed” description below that put the exact description of all work.
7. Project valuation. If exact project valuation is not known, an estimate must be provided to determine appropriate plan review deposit. Project valuations given should include the cost of all labor, materials and contractor profit. Separate permits for fire alarm systems, fire sprinkler systems, kitchen hood fire suppression systems, exterior signage and site work are required. Valuation for the above items should not be included with the project valuation given for the building permit.
8. All permit applications must be signed and dated by person responsible for submitting plans for plan review.

1. Name and complete street address of building.
2. Name, address and phone numbers of designers.
3. Designer’s code analysis specifying:
   • Occupancy type.
   • Type of construction.
   • Allowable floor area including any allowable area increases. 
   • Actual floor area including breakdown of individual use areas such as office, dining, sales and storage, etc., and based on Table 1003.2.2.2 of the International Building Code (IBC).
   • Occupant load calculations based on breakdown of individual use areas such as office, dining, sales and storage, etc., and based on Table 1003.2.2.2 of the IBC.
   • Building height.
   • Number of exits and exit width provided.
   • Required plumbing fixtures based on Section 403 of the International Plumbing Code (IPC).
4. Complete architectural, electrical, mechanical and plumbing plans